Home Features Fire Compartmentation, Fire Curtains and Certification

Fire Compartmentation, Fire Curtains and Certification

by Brian Sims

With fire safety increasingly a key consideration for the design of any commercial building, James Reed explains the key features to look for in a fire curtain to ensure it proves the best possible line of defence if and when a fire breaks out.

As a result of several high-profile news stories in recent times, the degree of attention paid to fire risk and corresponding mitigation and protection measures has significantly increased. Sadly, the most common cause of death in a fire incident continues to be the excessive inhalation of gas, smoke or toxic fumes. Therefore, in-built fire barriers are included in building design to prevent the spread of flames and smoke in order to reduce the risk to occupant safety.

The implementation of fire-resistant barriers, such as fire doors and fire curtains, into a building’s design divides a space into compartments. In large commercial premises, there are multiple challenges when it comes to building compartmentation and passive fire protection. With the rise in popularity of open plan layouts, it has become increasingly impossible to use fire doors due to the lack of available walls. Where fire doors cannot be implemented, fire curtains may be installed.

Stored discretely in a steel headbox located above a ceiling, lobby or doorway, a fire curtain is a highly robust piece of fire-resistant material. In the event of a fire, the curtain is released by a trigger from a fire alarm or local detector, which allows it to fall vertically via gravity obscuring the space, doorway or lift shaft above which it’s located. Once deployed, the role of a fire curtain is crucial for the prevention of flames spreading either laterally or vertically, acting as a physical barrier between the fire and the escape routes to be used by occupants in the evacuation of the building.

Unlike fire doors, curtains can be installed in a number of different locations including where there’s a lack of walls, such as in open plan spaces. A fire curtain can be used to replace a non-load bearing wall and fire-rated glazing, for example, which in turn allows open plan building designs to still meet the relevant regulations.

Critical escape routes

Fire-resistant curtains and doors serve three main purposes in a building, specifically to limit the initial development of a fire, prevent the spread of fire and protect escape routes. An effectively fitted fire curtain can help to suppress the growth and development of fire and smoke within a building.

The Building Regulations require escape routes to be protected and any opening, such as a doorway, that doesn’t use fire-resistant barriers poses the risk of fire spreading into designated escape routes. Therefore, fire curtains are used to protect building occupants when evacuating a building.

With the help of certification and testing, a fire barrier is designed to withstand the heat and effects of a fire for a specific period of time. This length of time is specified to enable an effective evacuation with enough time to make the necessary building checks in order to minimise the risk to human life.

Setting the standard

For the fire curtain industry, BS 8524 is an important British Standard, providing comprehensive guidance on specification and installation. Under BS 8524 Parts 1 and 2, only third party certified fire curtain products are granted compliance, while the third party assessing body appointed by the manufacturer must hold a United Kingdom Accreditation Service (UKAS) accreditation. For example, Coopers Fire works closely with IFC Certification Ltd and Warrington Fire, which are both UKAS-accredited certification bodies.

Aimed at specifiers, manufacturers, installers and facilities managers, the British Standard covers key aspects, such as the need for proficient installation and ongoing maintenance of the fire barrier, which must be achieved to illustrate competence and quality. This certification provides assurance to end users and building occupiers that the product has been subject to, and passed, thorough third party testing against a set of rigorous criteria.

The current British Standard superseded the former fire curtain specification, namely PAS 121:2007, in April 2013. Drawing upon the previous standard, BS 8524 covers the whole system and the process of installing and servicing these lifesaving products. For full compliance against this British Standard, fire curtains must have passed all of the necessary tests. If one or more of these tests are not completed the product is not considered to have reached the minimum requirements necessary to gain this seal of approval.

BS 8524 is segmented into two parts. Part 1, the specification for active fire curtain barriers, provides information, requirements and guidance on how to test for each aspect of the standard. It can only be achieved if all nine annexes, of which it comprises, are satisfied and approved by a third party certification body. Annex G, for example, outlines the testing method for motor operation, which involves placing it at elevated temperatures and at maximum loads following a prescribed timeline heat curve for a specified number of cycles.

Part 2 provides a Code of Practice for the application, installation and maintenance of fire curtains. The annexes it consists of include guidance on installation checklists, commissioning and maintenance. For example, the comprehensive Inspection Checklist in Annex F details the requirement for the curtain to descend into a ‘closed’ position at the required descent speed when the power cable to the control panel is disconnected. This proves the gravity fail-safe mechanism works and is able to maintain the required descent speed as dictated by BS 8524.

Resistance requirements

The fire resistance and integrity of components used in building construction has come under increased scrutiny in recent times. This, in turn, has placed a higher degree of focus on the level of integrity of every product. In relation to the fire resistance test for curtains and other fire barriers, the specific UK testing certification is BS EN 1634-1. It investigates how a fire curtain maintains its integrity when exposed to fire. The level of integrity illustrates a product’s fire resistance level.

Unlike fire door specification, Approved Document B which forms the UK’s Building Regulations, doesn’t have a mandatory requirement for fire curtains to include a vision panel. However, where a fire curtain is installed in place of a door, a vision panel could be a huge aid to first responders. For this reason, there’s a growing global demand for the ability to see through a curtain.

As well as preserving occupant safety, the role of a fire curtain is to offer protection to firefighters as they continue to extinguish the blaze. In an emergency, first responders are required to evacuate individuals from a building. Therefore, fire curtains with a vision panel may help in the process. Once deployed, a fire curtain or other barrier may hinder first responders in doing their job due to the inability to identify risk on the other side. By adding a window-like panel into the curtain, it enables flames and smoke to be identified in different sections of the building, which could ultimately save precious time in an evacuation.

James Reed

James Reed

A fire curtain with a vision panel is perfect for lift openings and lobbies, as well as escape routes incorporating doorways and corridors.

The benefits of having a vision panel in fire-resistant barriers are clear. However, where they appear in curtains there must be no compromise on compliance, quality and the product’s resistance level. Choosing products that are certified and have undergone thorough testing provides assurance to specifiers and facilities/risk managers that the fire protection measures in place are of the highest standard.

James Reed is Head of Engineering at Coopers Fire

You may also like

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More